If there is a sign marked “Awaiting better GPS accuracy ‘means the receiver gps have not lock the satellite successful, you should first, wait for 5 minutes, if still fail it can cause some possibilities:

1. GPS receiver has not been active

solution: GARMIN enter the program, select the symbol of the satellites in the yellow top left corner, select the Use Attached / Built in GPS, select enable wait until a green signal marks appear which means that the GPS Receiver has been successfully  lock the satellite

2. GPS receiver is in closed place
solution: try standing  in open up quite a successful show sign of the green signal appears which means that the GPS Receiver has been successfully lock the satellite

3. Glass film of the metal car
indeed there are some friends of the user up and down the GPS signal missing even when I in my car, the signal outside the car is full. after observed by what appeared to have the problem on the car windshield of a metallic film such VKOOL . solution: have to use external antenna to put outside the car for example MCX External GPS Antenna will cost around 200.000 more. Bad weather also affect the quality of the signals GPS Receiver us, I also had time driving when it was raining until deres-up to the car windshield wiper in fast positiont but most strange signal was never even full the time also, heat signal even wheeze up to 2 bar, red again.

tips: when we go to a place just select the menu Where To which there can be many options can be changged especial from the Home  , search Addresses, Point Of Interest, Panoramio etc. … oh yes one more Diamond have an AGPS feature so if u don’t want your pulse in limit, just select ‘No’ every question ‘Use data Network? “

-t0n3z4pp4

[Translate]

English العربية Indonesia 日本語 中文 (简体) powered by